| CLIA-4 | CLIA-3 | CLIA-2 | CLIA-1 | |
|---|---|---|---|---|
As FoundGravimetric
evaluation of pipette performance as received from customer. Pipette
performance prior to disassembling, cleaning, maintenance or calibration. As Found or As Received test is performed on pipette to
verify accuracy and precision. |
 |
|
|
|
Test PointsPipette is verified
at specific test points as per customer's requirement. Per ISO 8655 standards Pipettes are verified at 10%(Test Point 1 or TP1), 50%(Test Point 2 or TP2) and 100%(Test Point 3 or TP3) of
nominal volumes for any variable volume pipettes. A fixed volume
pipette is always verified at nominal volume. Verification below 10% is performed only upon special request. |
|
|
|
|
ReadingsDesired number of
readings at each test point to confirm accuracy and precision. |
|
|
|
|
Cleaning & MaintenanceInspection, External Cleaning, Complete
Disassembly, Internal Cleaning, Parts Performance, Piston Assembly Maintenance,
Polishing and Refurbishing, Functional Diagnosis, Re-Assembly, Test for
Functionality |
 |
|
|
|
As CalibratedGravimetric evaluation of pipette after cleaning, maintenance and calibration. Pipette is calibrated to either manufacturer's or ISO or customer specifications at 10%(Test Point 1 or TP1) and/or checked at (Test Point 2 or TP2) and/or 100%(Test Point 3 or TP3) to verify accuracy and precision . Service meets or exceeds manufacturer or ISO or customer specifications. |
|
|
|
|
Test PointsPipette is verified at specific test points as per customer's requirement. Per ISO 8655 standards Pipettes are verified at 10%(Test Point 1 or TP1), 50%(Test Point 2 or TP2) and 100%(Test Point 3 or TP3) of nominal volumes for any variable volume pipettes. A fixed volume pipette is always verified at nominal volume. Verification below 10% is performed only upon special request. |
TP1,TP2,TP3,TP4 | TP1,TP2,TP3 | TP1,TP3 | TP1 |
ReadingsDesired number of readings at each test point to confirm accuracy and precision . |
4 | 4 | 4 | 4 |
Due Date LabelsNext due date labels affixed per customer’s
requirement. |
|
|
|
|
CertificateA NIST traceable certificate of calibration
issued in compliance with CLIA/CAP or ISO 17025 standards. |
|
|
|
|
WarrantyCalibration warranty is valid if pipettes are
not abused (physical or chemical trauma), & are used in accordance with the
instructions contained in the manufacturer’s operating manual. |
|
|
|
|
RepairsFree repair estimates. Flat fee applies for all major repairs. |
|
|
|
|
PartsAll parts replaced at additional charge. Seals replaced once a year on certain models
and billed to customer. |
|
|
|
|
